1-1/2″ Grating M-Clip

316 Stainless Steel
Mesh Pattern:
Adding to cart… The item has been added

Product Overview

Construction: Grating clips are specifically designed for use with 1-1/2" Mesh Pattern Molded Fiberglass Grating. Made entirely of 316 Stainless Steel with a 1/4" minimum opening for fasteners.

Clips should be used in sufficient quantity to firmly hold each piece of grating in place. It is recommended that at least (8) clips be used on a 4' x 12' panel, and that small pieces of grating be fastened with no fewer than (4) clips. Use of 1/8" to 3/16" spacing between panels is normal to allow for thermal expansion of the grating panels. For stairtreads, it is recommended that at least (4) “M” type clips be used on each tread, and that treads be supported by clip angles and not bolted directly to the stringers.

Note: Each installation is different, and sufficient clips should be used to securely fasten the grating to the supports to resist movement of the grating or edges raising up and presenting a tripping hazard.

This information is provided as a guide for the use & application of Heartland Fiberglass Supply Clips and is not or does not represent a specific warranty of the product or its performance. The designer or user must determine the suitability of this product for a specific application.